Alaris Medical Systems MedSystem III, Инструкция по применению

Страница: 34 / 66

GETTING STARTED
31
GET
TING ST
ARTED
To change Device Type (Continued)
Settings
-----
ALARM
Rate/Vol
Alarm Info: Press channel A
CANCEL QUIET
Cleared
If channel is infusing when device type is changed and
preset values are not compatible with the newly selected
device type,
• The display switches to the notification screen.
• Incompatible Channel(s) is indicated.
• Choice is given to continue.
If
N No o
,
• Display reverts to Change Device Type page for user to
select another device type.
If
Y Ye es s
,
• The pump will alarm.
• Infusion will stop on affected channel(s).
• Display reverts to Standard Display with Alarm indicated
in affected channel.
6. Press affected channel
,
or .
7. Follow instructions displayed.
Pump Not
In Use
Advisory
Yes Yes Yes No Yes No
Occlusion
Detection
Method
Baseline Baseline Baseline Baseline Baseline
Occlusion
Alarm
Setting
B5 psi Ba3 psi 3 ft H2O Ba5 psi Ba5 psi Ba5 psi
Default General
Neonatal
Controller Operating General Operating
Parameter Purpose Pressure Room Purpose II Room II
* Channel will infuse at the KVO rate shown in table or at the current infusion rate, whichever is lower.
Table 1
NOTE: Values shown in table can be modified to meet the institution’s requirements using FMS software. To
review actual default parameters on a MedSystem III® DLE instrument. Select a Device Type and refer to
Instrument Settings pages 2 through 5. An asterisk appears beside settings which are not factory default.
Maximum
Pressure
15 psi 15 psi 3 ft H2O 15 psi 15 psi 15 psi
Air-in-line
Alarm
Threshold
500 µl 50 µl 500 µl 500 µl 500 µl 500 µl
Absolute
Threshold
KVO Rate*
3 ml/h 1.0 ml/h 3 ml/h 3 ml/h 3.0 ml/h 3.0 ml/h
Rate Range
1 —999 ml/h 0.1 —99.9 ml/h 1 — 299 ml/h 1 —999 ml/h 0.1—999 ml/h 0.1—999 ml/h
Maximum
VR Setting
9999 ml 9999 ml 9999 ml 9999 ml 9999 ml 9999 ml
ALL Setting
for VR
N/A N/A N/A Option N/A Option