background image

OPERATION

Operation Section 4-4

OPERA

TION

© 2004 Alamo Group Inc.

M-8000MD   12/04

OPERATOR REQUIREMENTS

Safe operation of the snow blower is the responsibility of a qualified operator.  A qualified operator has read and
understands all Operator’s Manuals and is experienced with snow blower operations and all associated safety
practices.  In addition to the safety messages contained in this manual, safety message decals are affixed to the
snow blower and tractor.  If any part of the operation and safe use of the snow blower are not completely understood,
consult an authorized dealer for a full explanation.

Safe operation requires that the operator wear approved Personal Protective Equipment (PPE) for the job conditions
while connecting, operating, servicing and repairing the snow blower.  PPE is designed to provide operator protection
from bodily injury and includes the following:

Personal Protective Equipment (PPE)

Protective eye glasses, goggles, or face shield

Hard hat

Steel toed safety footwear

Gloves

Hearing protection

Close fitting clothing

Respirator or filter mask

NEVER use drugs or alcohol immediately before or while operating
the Tractor and Implement.   Drugs and alcohol will affect an
operator’s alertness and coordination and therefore affect the
operator’s ability to operate the Equipment safely.   Before
operating the Tractor or Implement, an operator on prescription
or over-the-counter medication must consult a medical
professional regarding any side effects of the medication that
would hinder their ability to operate the Equipment safely.
NEVER knowingly allow anyone to operate this Equipment when
their alertness or coordination is impaired.   Serious injury or
death to the operator or others could result if the operator is
under the influence of drugs or alcohol. 
 

(SG-27)

DANGER!

Содержание Great White M8000MD























































































Отзывы: