Alamo Industrial Great White M8000MD, Руководство оператора

Страница: 51 / 86

OPERATION
Operation Section 4-10
OPERA
TION
© 2004 Alamo Group Inc.
M-8000MD 12/04
Operating the Snow Blower
When ready for use, stop the snow blower and set the
chute deflector to the desired position. Adjust shoe
so that the blade is at the desired height. Make sure
that the blade is running at an even height at both ends.
Check that the skid shoes are approximately 1/2” below
the snowblower frame. This will pitch the machine
forward slightly to provide a steeper cutting angle for
the cutting edge. Be sure to replace the cutting edges
when they become worn to prevent wear on the
snowblower frame. Adjust the skid shoe using the
crank handle. Count the turns of the handle for each
side to ensure level adjustment.
FIGURE 11
FIGURE 12
Optional Gauge Wheels
On units equipped with optional gauge wheels, set
height by adjusting the ratchet jack. Once height is
set use jam nut on Jack to lock in place.
Adjust Ratchet to set
Gauge Wheel Height