Alamo Industrial Great White M8000MD, Руководство оператора

Страница: 56 / 86

OPERATION
OPERA
TION
Operation Section 4-15
© 2004 Alamo Group Inc
.
M-8000MD 12/04
Properly preparing and storing the snow blower at the end of the season is critical to maintaining its appearance
and to help ensure years of dependable service. The following are suggested storage procedures:
1. Thoroughly clean all debris off the implement to
prevent damage from rotting grass and standing
water.
2. Lubricate all implements points and fill gearbox oil
levels as detailed in the maintenance section.
3. Tighten all bolts and pins to the recommended
torque.
4. Check the implement for worn and damaged parts.
Perform repairs and make replacements
immediately so that the implement will be ready
for use at the start of the next season.
5. Store the implement in a clean, dry place with the
implement resting securely on blocks or at ground
level.
6. Keep the drivelines yokes or hydraulic hoses from
sitting in water, dirt and other contaminants.
7. Use spray touch-up enamel where necessary to
prevent rust and maintain the appearance of the
implement.
8. Shut off Master Power Switch.
SNOW BLOWER STORAGE
FIGURE 18
MASTER POWER SWITCH
FIGURE 17