Alamo Industrial Great White M8000MD, Руководство оператора

Страница: 16 / 86

Safety Section 1-13
SAFETY
©
2004
Alamo Group Inc.
SAFETY
M-8000MD 12/04
WARNING!
Perform service, repairs and lubrication according to the maintenance
section. Ensure the unit is properly lubricated as specified in the
lubrication schedule and all bolts and nuts are properly torqued.
Failure to properly service, repair and maintain this Implement in good
operating condition could cause component failure and possible
serious injury or even death.
(SG-35)
WARNING!
Never leave the Power Unit and Implement unattended while the Implement
is in the lifted position. Accidental operation of the lifting lever or a
hydraulic failure may cause a sudden drop of the unit with possible injury
or death by crushing. Fully lower the Implement to ground level to
disconnect the Implement or to perform service. Do not put hands or feet
under lifted components.
(SPU-30)
DANGER! Always disconnect the auxiliary hydraulic couplers from the Power Unit
before performing service on the Implement. Never work on the
Implement with the Power Unit auxiliary hydraulics connected. Rotating
parts such as blades could turn without warning and cause immediate
entanglement, injury or death.
(SPU-31)
DANGER! Never crawl under a raised Implement supported solely by the Power Unit
boom. Release of the control lever or mechanical failure will result in the
Implement falling and possible injury or death. Always securely block up
the Implement before crawling underneath to perform repairs and service.
(SPU-33)
WARNING! DO NOT weld or repair rotating Blower components. Welds and other
repairs may cause severe vibration and/or component failure result-
ing in parts being thrown from the blower causing serious bodily
injury. See your Authorized Dealer for proper repairs.
(SSB-14)
WARNING!
Ensure the remote starting system is inoperative before servicing or
cleaning the machine. Inadvertent engine start up could result in
entanglement or runover causing serious injuries or death.
(SSB-17)
WARNING! Use only OEM specified shear pins as replacements pins. The use of
incorrect shear pins can cause failures in the Snow Blower rotating
components resulting in property damage and/or serious bodily injuries.
(SSB-19)
Use extreme care when climbing onto the Equipment to perform repairs,
maintenance, and cleaning. Use proper stands and ladders to access
areas that cannot be reached from ground level. Slipping and falling off the
Equipment can cause serious injury or death.
( SSB-25 )
WARNING!