Akron EXG 400 X, Руководство пользователя

Страница: 99 / 106

99
EXG 400 X GRAIN BAG UNLOADER
13. PARTS SUBJECT TO NORMAL WEAR AND TEAR:
Ordinary maintenance and spare parts replacement services of the parts detailed below are the
equipment owner’s exclusive responsibility, therefore, they will not be considered defects in material or
manufacturing, but rather defects due to normal wear and tear; improper operation or insufficient
equipment maintenance.
·
Chains
·
Augers
·
Bearings
·
Articulation Bushings
·
Oil
·
Wheels
·
Sprockets
·
Brake System ( brake pad ; shoe linings)
·
Wear due to grain friction
Parts subject to improper operation or insufficient maintenance.
Using the gearboxes without normal oil level or not complying with the transmission inlet specifications
described in the user’s manual.
Altering the maximum inlet torque (shear bolt system on PTO).
Wheel nuts:
After around 30 hours of running or after changing a wheel, wheel nuts must be retighten
according to the torque values detailed in the manual 9kgm =90 Nm = 65 lbs. pie - point 7.f.
Special care should be taken to the wheel nuts tightening if the machine has moved over paths or
roads. Failure to follow these instructions may cause rim damage or lost of it.
MACHINE
MAXIMUN ALLOWED
INLET TORQUE
PROBABLE CAUSES THAT
CAN ALTER THE MAXIMUM
ALLOWED TORQUE
EXG 400 X Unloader 1860 N/m
Replacing the PTO’s shear pin with
a different bolt specification.
Using a PTO that exceeds the
maximum torque allowed by the
machine.
PARTS SUBJECT TO
NORMAL WEAR
AND TEAR