Akron EXG 400 X, Руководство пользователя

Страница: 26 / 106

26
EXG 400 X GRAIN BAG UNLOADER
Instruction Action Obs.
Take the sweep auger ends from
transport position and place them
into working position, taking into
account the turning direction.
Unhook the roll by pulling up the
latch located at the front part of the
chassis, and make it turn until
reaching its transverse position; put
the supporting arm down in order to
lock it.
Remove the lock pin of the superior
tube support and activate the
“Auger” hydraulic control until the
tube is completed unfolded.
Cut the bag manually and open the
cut, leaving the grain at sight (as
shown in the figure).
Check that the blade is aligned with
the cut made manually in order to
continue cutting. Remove the blade
cover to start working.
Activate the "Roll” control.
With the tractor, take the machine
backwards,
as centered as
possible, and hook the bag to the
roll by causing the roll to rotate.
Activate the “Height” control to
adjust the operating height.
Once again activate the “roll” control
to start operating.
Warning
Check that the blade cover
protects the blade while the
machine is not operating.
Warning
When operating the mechanical
parts, care must be taken so as
to avoid injuries used by trap-
ping.
Warning
Avoid arm crushing while the
roll is operating.
Warning
Avoid hand crushing when
turning the roll into operating
position.