AKO -D101 Series, Руководство пользователя

Страница: 3 / 32

1.- Introduction
The Darwin controller range is particularly suitable for controlling refrigerating equipment, wall units, islands, cabi-
nets, electrical panels, etc.
The wide range of models available ensures the best solution for each application.
The small SLIM models have been developed for applications where little space is available for the controller.
STANDARD models are specifically designed for applications requiring a considerable number of output relays,
h
Information displayed on the high-brightness screen has been grouped according to functionality. A first large
display shows the temperature and operating messages. The second display shows icons for the various outputs.
The built-in gasket on the front panel (Only AKO-D14xxx models) afford the unit a high degree of IP protection and
new features have been added which allow more efficient refrigeration management, thus saving energy.
The menu settings are optimized for fast and intuitive programming and may be pre-programmed according to the
application for faster start-up.
Available Models
igh load switching power and various functions with keypad shortcuts.
EXTENDED FRAME models incorporate two switches for additional functions. Ideal for controlling the turning
on/off of the cabinet, lights, etc.
Application
AKO-D140xx Thermometers. Ideal for applications where only the temperature needs to be shown.
AKO-D141xx
1-relay controllers designed to control positive services (above 3 ºC). Defrost by compressor
shutdown. Cold/Heat operation.
AKO-D142xx
2-relay controllers designed to control positive services (above 3 ºC). Defrost by air or
resistors.
AKO-D143xx
3-relay controllers designed to control positive services (above 3 ºC). Defrost by resistors
or cycle reversal.
AKO-D144xx
4-relay controllers designed to control positive or negative services. Defrost by resistors or
cycle reversal. Configurable auxiliary relay.
AKO-D101xx
1-rela to control positive
services (above 3 ºC). Defrost by compressor shutdown. Cold/Heat operation.
y extended frame controllers and two auxiliary switches, designed
AKO-D102xx
2-relay ed to control positive
services (above 3 ºC). Defrost by air or resistors.
extended frame controllers and two auxiliary switches, design
AKO-D103xx
3-relay extended frame controllers and tw ned to control positive
services (above 3 ºC). Defrost by resistors or cycle reversal.
o auxiliary switches, desig
3