AKO AKO-15650, Руководство пользователя

Страница: 24 / 36

7
- Data display
It displays the data logged in the selected block on the screen.
The name of each block indicates the date and time of its first log, but when it is displayed, the first datum
displayed is the last log of the block.
4
-Graph display
It displays the graph with the data logged in the selected block on the screen.
9.8.- HACCP logging
(Hazard analysis and critical control points)
It logs events that might endanger the integrity of the products stored in the cold store room.
If the cold room exceeds the temperature indicated in the “
Maximum alarm in sensor 1 ”
parameter, for longer than indicated in the “HACCP alarm delay” parameter (
s
menu),
the unit logs an HACCP event.
If the
s
flashes, it indicates that a new HACCP event has been logged.
If this event occurs caused by a fault in the power supply, this is indicated in the log.
Log date
Log time Log value
Log no.
First log: 00
Last log: 95
SET
SET
Scrolling through
logs
Log interval
Last log
date and time
First log
date and time
Scale
maximum
Log value
Scale
minimum
Log no.
SET
Scrolling through
blocks
SET
Scrolling through
events
Maximum
temperature
Type of
selected event
P. Failure: Power failure
Temperature: High temperature
Event date
Event duration
in hours
Power supply fault
Event time
7
- Data display
It displays the data logged in the selected block on the screen.
The name of each block indicates the date and time of its first log, but when it is displayed, the first datum
displayed is the last log of the block.
4
-Graph display
It displays the graph with the data logged in the selected block on the screen.
9.8.- HACCP logging
(Hazard analysis and critical control points)
It logs events that might endanger the integrity of the products stored in the cold store room.
If the cold room exceeds the temperature indicated in the “
Maximum alarm in sensor 1 ”
parameter, for longer than indicated in the “HACCP alarm delay” parameter (
s
menu),
the unit logs an HACCP event.
If the
s
flashes, it indicates that a new HACCP event has been logged.
If this event occurs caused by a fault in the power supply, this is indicated in the log.
24
1565H041 Ed.03