AKE PowerCom plus Series, Инструкции по эксплуатации и монтажу

Страница: 27 / 32

o
o
o
o
o
o
o
Two channel operation possible. Connection of stereo devices possible
Hands-free kit of two-way radio
All PowerCom versions with hands-free kit for two-way radio offer the possibility to
connect CB, LPD, PMR and other two-way radios. The connection is provided with
an optionally available adapter for two-way radio systems.
Please remove the protective cap at the PowerCom control device, marked [F].
Plug in the adapter and slide the supplied weather protection centrically over the
plug connection. Now take the cable (not close to the ignition wires) and connect
the other end with your two-way radio system.
The fit-for-motorbike hands-free kit will provide you with the following combina-
tions for your convenience:
Automatic volume control of the two-way radio signal depending on road
noise
Road noise compensated automatic voice control (fit-for-motorbike VOX)
¹
,
possible when using the optional user interface with hands-free operation
or manual operation with transmission button
If applicable, volume lowering of the audio signal (music) and the
navigation system signal possible while using the two-way radio
Automatic modulation adjustment depending on driving noise or with
trimmer for optimum transmission
Universal modulation output will recognize whether y s
equipped with a dynamical or electret microphone and adapts auto-
matically
ON TOUR and INNOVA comes additional with elimination of the VOX
response delay from two-way radios ²
The antenna of the two should not be positioned close to the PowerCom
control unit. The VOX must be disconnected, if applicable.
Please mind the National Communication Law when using two-way radios.
For further information regarding the mounting of two-way radio, antenna, etc.,
please read the operating and installation instructions of the equipment used.
our two-way radio i
-way radio
Sub-audio-sound, like
CTCSS and DCS should only be switched on if absolutely necessary.
27
E
N
G
L
IS
H
¹) activated by iVOX - activator at remote connector [ R ] of the PowerCom-System.
²) many radios need a long time, to switching from receiving to sending, thereby the
beginning of the sentence can be cut off with VOX operation.