AKA SIGNUM MFD 7272M CLASSIK Скачать руководство пользователя

Страница: 28 / 65

Departement of international trade:

https://aka-md.com

| +74957991510 |

[email protected]

This retraction of the coil in this direction must pass through the origi-

nal coordinate. Reenable the static mode. Scan the object along the line

as accurately as possible

keeping a minimum distance between the ground

and the sensor.

The recorded coordinate of the maximum frequency

tones sound on line B, will determine the exact location of the object.

To return to the dynamic mode press the button again

MODE “TURBO”

In the “Turbo” mode the search coil operates at the forced excitation

current.

This mode allows you to increase the sensitivity of the device and to

improve the immunity of the device from external electromagnetic

interference.

Attention!

The “Turbo” mode greatly increases current consumption and as

such battery operating time is greatly reduced! The identification of shallow

deep targets also become worse due to an increase in the ground signal.

Switch to TURBO and back by using the button

while in search mode. It is necessary to ensure that the settings ST/RT

sensitivity and volume on the display screen are not displayed.

Turbo mode is enabled separately for each program.

Advice from an experienced searcher:

Remember that turning on the Turbo dramatically increases the energy

consumption of the device. And if the batteries or accumulators of your

device are discharged, after turning on the Turbo the device may display

the inscription “Battery is low” and stop working. Turning it on and off

will not help, since the device will continue to turn on in the program

with Turbo turned on, and it will not have enough voltage to work. If

you do not have spare batteries or accumulators with you, there are two

ways to solve the problem:

Содержание SIGNUM MFD 7272M CLASSIK


































































Результаты поиска

Содержание SIGNUM MFD 7272M CLASSIK

Отзывы:

Похожие инструкции для SIGNUM MFD 7272M CLASSIK

Бренды по названию

Популярные бренды

AKA SIGNUM MFD 7272M CLASSIK, Руководство пользователя

Результаты поиска

Содержание SIGNUM MFD 7272M CLASSIK

Отзывы:

Похожие инструкции для SIGNUM MFD 7272M CLASSIK

Бренды по названию

Популярные бренды