47
AK-SecurePowerSwitch Manual,
Configuration
Settings :
First enter the IP addresses or the DNS names of the servers which are available on the
Internet under
“Target station”
. In this case,
two
reliable servers are used which should
normally be available at any time. Even if one server is not available for a short time, there
is no accidental switch function since the other server is still available. If there is a failure
of the router, both servers are no longer available as described in this case. This will then
result in the switch-over procedure “Off” and takes place as follows: (refer to the following
page)
In order to check the function, the individual numbers of the conditions indicate the status
of the test in colours.
Green
:
The condition applies.
Yellow
:
The condition applies; the test is not completed yet.
Red
:
The condition does not apply.
