41
AK-SecurePowerSwitch Manual,
Configuration
Settings :
First enter the IP addresses or the DNS names of the workings station which needs to be
monitored under
“Target station”
. You can enter the conditions in the lower area of the
page. In this case, the
SecurePowerSwitch
checks with the conditions 1 to 5 if the
corresponding working station are not available. If all 5 working stations are no longer
available, the
SecurePowerSwitch
switches off the departmental printer. The conditions 6
to 10 are used to check if one of the working stations was switched on again and is
available. If this is the case, the
SecurePowerSwitch
immediately
switches on the
departmental printer.
In order to check the function, the individual numbers of the conditions indicate the status
of the test in colours.
Green
:
The condition applies.
Yellow
:
The condition applies; the test is not completed yet.
Red
:
The condition does not apply.
