18
AK-SecurePowerSwitch Manual,
Configuration
Timer settings
Activate a timer using this menu. To do so, first set the exact time. You may either activate
an Internet time (NTP) or you may set the internal Real-Time-Clock (RTC).
NTP
:
Set “NTP Y/N” to “Y” and press the button “Save”. After restarting, the NTP time will fade
in.
Note
:
To do so, it is necessary to connect the AK-SecurePowerSwitch to the Internet.
RTC
: (
in preparation
)
The current PC will be faded in. Press the button “Adopt” and the time will be saved in the
RTC.
Note
:
After a few days you should check the time. If you detect a considerable deviation
between the PC time and the RTC time, then press again the button “Apply”. If you repeat
this process more often, fewer deviations will occur. This will be attained by an internal
automatic correction.
