location and that it meets the requirements of this manual.
To install the detector:
1.
Remove the SmartBracket mounting panel from the left side of the detector
by gently pushing and pulling it down.
2.
If you are using a large magnet, remove the SmartBracket mounting panel
from it by slightly pushing and pulling it down as shown in the previous step.
If you are using a small magnet, disassemble its enclosure by prying up the
back with a at object. Use a slotted screwdriver for this.
If there is no need to detect opening, the magnet is not installed.
3.
Secure SmartBracket mounting panel to the door or window frame surface
using double-sided adhesive tape or other temporary fasteners.
