External Contact Type
Selecting the type of a third-party
terminals:
The option is available for detectors with
rmware version 5.53.1.0 and higher.
Time Before Alarm, sec
The time for which the speci ed number of
impulses should be counted: 5 to 30 seconds.
Counted after the rst impulse from the roller
shutter detector connected to DoorProtect Plus.
This setting is displayed if the type of external
contact is Roller Shutter.
Impulses Before Alarm
A number of impulses from the roller shutter
detector connected to DoorProtect Plus, which
is required to raise an alarm: 2 to 7.
This setting is displayed if the type of external
contact is Roller Shutter.
Shock Sensor
When this option is enabled, the detector
detects shocks.
Sensitivity
Shock sensor sensitivity level. The choice
depends on the type of the object, the presence
of probable sources of false alarms, and the
speci cs of the protected area:
External Contact
— any third-party detector
with NC (normally closed) contact.
Roller Shutter
— roller shutter motion
detector.
Learn more about connecting the
motion detector of the roller shutter
Low
— there are likely sources of false
alarms in the protected area. For example,
vibration from freight machines driving by.
Normal
(default value) — recommended
value suitable for most objects. Do not
change it if the detector works correctly.
