This setting is displayed if the type of external
contact is Roller Shutter.
Alert with a siren if shock detected
are activated when DoorProtect Plus
detects a shock.
Alert with a siren if tilt detected
are activated when DoorProtect Plus
detects a tilt.
Chime Settings
Opens the Chime Settings.
Jeweller Signal Strength Test
Switches the detector to the Jeweller signal
strength test mode.
To determine the optimal installation location
for the device, the test allows you to check the
communication signal strength between the
detector and the hub (or the range extender)
over the Jeweller wireless data transfer
protocol.
Recommended value is 2–3 bars.
Detection Zone Test
Switches the detector to the detection zone test
mode.
The test checks how the detector responds to
opening/shock/tilt and determines the optimum
installation place.
To check the tilt and shock
sensor before starting the test,
enable these sensors in the
detector settings.
If the detector does not respond to
opening/shock/tilt in 5 cases out of 5 during
the test, increase the sensitivity of the detector.
