OG-UDC 3G-SDI Up, Down, Cross-Converter v1.0 24 www.aja.com
Audio Tab Screen
Figure 19. OG-UDC Audio Tab Screen in DashBoard
The Audio Tab Screen is where you can configure OG-UDC HDMI and analog
(RCA-style) audio output channels. There is no DIP switch equivalent for these
controls. The setting is saved in nonvolatile memory in the module and used for
all subsequent operation.
NOTE: The SDI embedded output audio is a channel-for-channel copy of the input SDI
embedded audio. There are no user controls.
HDMI Audio
Selects how many SDI channels are passed to the HDMI connector and which
channel pairs are selected. Select from the following:
Auto -
The OG-UDC automatically selects the audio output configuration based
on communicating with the attached HDMI device.
2 Channel -
Outputs a pair of channels from the SDI stream to two channels on
the HDMI output connector. The selected audio pair is determined by the
Analog Audio setting (below).
8 Channel -
Outputs SDI channels 1 through 8 to the HDMI output connector.
Analog Audio
Selects the channel pair that will be output to the Analog RCA connectors (L/R)
and the HDMI audio output (when HDMI Audio is in 2-channel mode). Choose
from the following:
Channel 1+2
Channel 3+4
Channel 5+6
Channel 7+8
Channel 9+10
Channel 11+12
Channel 13+14
Channel 15+16