OG-UDC 3G-SDI Up, Down, Cross-Converter v1.0 15 www.aja.com
Figure 10. Rear view of the WECO mating audio connector
2. Tighten the screws on the other side of the audio mating connector (
Figure
11
).
Figure 11. Front view of the WECO mating audio connector showing the
tightening screws
3. After you have secured the wiring for each WECO mating audio connector,
connect them to the audio output connectors on the rear panel of the
OG-UDC.
4. Add tie wraps around the audio connectors for strain relief.