OG-UDC 3G-SDI Up, Down, Cross-Converter v1.0 23 www.aja.com
Provides user selection of the HDMI output modes. There is no DIP switch
equivalent for these controls. The setting is saved in nonvolatile memory in the
module and is used for all subsequent operation.
NOTE: The HDMI video output always mirrors the SDI video output, both in content and
output format selection. Click on the Output tab to view and make changes to the
OG-UDC output settings.
NOTE: When the output format is set to 1080PsF 23.98 or 1080PsF 24, the HDMI output
is converted to interlace because HDMI does not have a corresponding supported
format.
Protocol
Selects whether the HDMI output uses DVI or HDMI protocols for sending video
to the destination device. Select from the following:
Auto -
OG-UDC automatically selects the output protocol based on getting the
attached HDMI device's EDID information. This is the recommended setting.
HDMI -
OG-UDC uses HDMI protocols regardless of the attached device's EDID.
DVI -
OG-UDC uses DVI protocols regardless of the attached device's EDID.
Because DVI protocols do not support audio or HDMI InfoFrame ancillary data,
select this mode only if you know that the attached device requires it.
Color Space
Selects the HDMI output color space and depth. Choose from the following:
Auto -
OG-UDC automatically selects the mode based on getting the attached
HDMI device's EDID information. This is the recommended setting.
RGB 8Bit -
OG-UDC uses 8-bit RGB mode regardless of the attached device's
EDID.
RGB 10Bit -
OG-UDC uses 10-bit RGB mode regardless of the attached device's
EDID.
YCbCr 10Bit -
OG-UDC uses 10-bit YCbCr mode regardless of the attached
device's EDID.
RGB Range
Selects the HDMI video levels when the Color Space is RGB 8Bit or RGB 10Bit.
Select from the following:
Auto -
The OG-UDC automatically selects the mode based on getting the
attached HDMI device's EDID information. This is the recommended setting.
SMPTE -
The OG-UDC scales the output video level to 8-bit range 16 - 235 (10-bit
64 - 940) regardless of the attached device's EDID.
Full Range -
The OG-UDC scales the output video level to 8-bit range 0 - 255 (10-
bit 0 - 1023) regardless of the attached device's EDID.