AJA kumo 1604 Скачать руководство пользователя страница 6

Страница: 6 / 73

KUMO SDI Routers and Control Panels v4.7r1 6

www.aja.com

Chapter 1 – Introduction

Overview

KUMO compact SDI routers are small and cost-effective, yet robust and reliable.

All KUMO routers support full-broadcast specifications over SD-SDI, HD-SDI, and

3G-SDI. A KUMO-12G router also supports single connector 12G-SDI. Additionally,

KUMO routers support SDI related protocols such as 270Mb/s DVB-ASI and Canon

3G-SDI RAW. KUMO routers are re-clocking, non-blocking, and ready for any

broadcast, production, or post production environment. Running Embedded

Linux, KUMO routers support powerful HTTP control and monitoring. Each KUMO

product contains an internal web server that allows immediate installation,

configuration, and operation without requiring additional software. It offers a

powerful user interface via any standard web browser. KUMO SDI routers are

available in seven configurations:

•  KUMO 1604 - sixteen SDI inputs and four outputs
•  KUMO 1616 - sixteen SDI inputs and sixteen outputs
•  KUMO 1616-12G - supports single connector 12G-SDI, sixteen SDI inputs and

sixteen outputs

• KUMO 3232 - supports thirty-two SDI inputs and thirty-two outputs
• KUMO 3232-12G - supports single connector 12G-SDI, thirty-two SDI inputs

and thirty-two outputs

• KUMO 6464 - sixty-four SDI inputs and sixty-four outputs

Содержание kumo 1604










































































Результаты поиска

Содержание kumo 1604

Отзывы:

AJA kumo 1604, Инструкция по установке и эксплуатации, Страница: 6 / 73

Результаты поиска

Содержание kumo 1604

Отзывы: