AJA kumo 1604 Скачать руководство пользователя страница 34

Страница: 34 / 73

KUMO SDI Routers and Control Panels v4.7r1 34 www.aja.com

Chapter 4 – KUMO Remote Control Panels

Overview

The KUMO hardware panels are Destination-oriented control panels allowing

selection of Sources and Destinations on each of up to four KUMO routers. A

KUMO control panel will connect to a single KUMO router automatically without

computer/browser interface. For connection to up to four routers on a single CP,

use the KUMO browser interface to assign the router select buttons to any four

KUMO routers on your network.
Two KUMO hardware panels are available, the KUMO CP able to control up to 32

Sources and Destinations, and the KUMO CP2, able to control up to 64.

NOTE: The 32 button KUMO CP hardware Control Panel can be used with a KUMO 6464

router operating in Normal mode, but can only control the first 32 Sources and

Destinations. The KUMO CP can be used to fully control a KUMO 6464 that is

operating in Dual or Quad mode. Control of the KUMO 6464 router in all modes

is available via the KUMO CP2 64 button hardware panel, web browser, Ethernet

control, and RS-422.

KUMO Control Panel Installation and Network Configuration

Refer to

"Chapter 2 Installation" on page 11

for detailed information about

KUMO hardware control panel installation and network configuration.

Connectors and Indicators

Figure 27. KUMO CP Connectors and Indicator

RJ-45 LAN Ethernet

Connection

Identify LED

PS 1 & PS 2

Power Supply

Connectors

Power Connectors

KUMO CP provides inputs for two power supplies—one included, redundant

supply optional.

Содержание kumo 1604










































































Результаты поиска

Содержание kumo 1604

Отзывы:

AJA kumo 1604, Инструкция по установке и эксплуатации, Страница: 34 / 73

Результаты поиска

Содержание kumo 1604

Отзывы: