AJA kumo 1604 Скачать руководство пользователя страница 30

Страница: 30 / 73

KUMO SDI Routers and Control Panels v4.7r1 30 www.aja.com

2. The Identify LED will blink, then light steadily, and then go out, indicating

the password has been reset to default.

KUMO Control Panel Password Reset

1. For a KUMO CP/CP2, press and hold the two SHIFT buttons on the panel for

more than eight seconds and then release.

2. The Panel Lock button will be colored red and then go out, indicating the

password has been reset to default.

UPnP Host

UPnP Host enables the KUMO to be discovered by a Windows network.
Selecting

Enable

(default) allows KUMO to be discovered by a Windows network.

Selecting

Disable

prevents Windows network discovery of the KUMO.

Firmware Updating

AJA is constantly upgrading its product software so it is a good idea to check

the AJA website often for updates and to assure optimum system performance.

Go to the AJA KUMO Update web page by clicking the link at the bottom of the

FIRMWARE Screen, or using the following link:

https://www.aja.com/family/kumo#support

Click on any of the KUMO products to go to its support tab.
Current firmware version number is reported here under the pull-down menu,

and the device’s serial number is listed at the bottom of the screen.

Figure 22. KUMO Web Interface, Firmware Upload Screen

Unpack the Software

Download the latest version of KUMO firmware and use the FIRMWARE Screen

to upload it to your KUMO router. KUMO software update files are “ZIP” files,

which you can open with a number of standard and third party uncompressor

applications. The software image that you’ll install on KUMO is a file with a name

similar to:

• kumo_ver_4.0.0.3-1475859474.bin

Содержание kumo 1604










































































Результаты поиска

Содержание kumo 1604

Отзывы:

AJA kumo 1604, Инструкция по установке и эксплуатации, Страница: 30 / 73

Результаты поиска

Содержание kumo 1604

Отзывы: