AJA IO LA, Инструкция по установке и эксплуатации, Страница: 61 / 76

1
53
Io LD and Io LA Installation and Operation Manual — Checking the System with a
Create a New Project
3. The Sequence window will be at the bottom of the screen and a Browser
window will be at the top left. Look at the Browser window and locate the
“Effects” tab at the top right. Click on it.
4. Locate the Video Generators folder and open it. Do this by clicking on the
triangle or double-clicking it. Inside the Video Generators folder, find the “Bars
and Tone NTSC” (or PAL) icon. Click and drag it to the Sequence window
onto the “v1” track at the top. When you let go of the mouse button you’ll see a
video track and two audio tracks.
5. Click the mouse cursor on the Bars and Tone clip while holding the Control
key. A contextual menu will pop up; find the Duration menu item and select it.
Set the duration to a short value (00:00:00:60).
6. Locate the Canvas window at the top right side of the Final Cut display. Find
the transport buttons at the bottom of the Canvas window (Play, Go to
beginning, etc.).
7. Go to the beginning of the sequence by clicking on the left-most icon and then
click the “Play” icon. You should see and hear the bars and tone on your video
monitor and audio monitoring system.
If you don’t see bars on the external video monitor and hear tone, check your
connections and ensure Io is selected in the Easy Setups and Audio/Video Settings as
necessary.