AJA IO LA, Инструкция по установке и эксплуатации, Страница: 25 / 76

1
17
Io LD and Io LA Installation and Operation Manual — Rear Panel
•
IEEE 1394a FireWire connector for audio/video and control data between the
panel and an Apple Power Mac.
•
SDI video with 8 channels of 24-bit embedded audio Input (1 BNC).
•
SDI video with 8 channels of 24-bit embedded audio Output 1 and 2 (two
BNCs).
•
SDI Loop connector (1 BNC), that mirrors the input.
•
Ref Loop connectors for Genlock/External Reference Video (looping), two
BNCs
•
AC power connector, 3 pin (with Ground)
Each of these connectors are discussed on the following pages.
Io
LA
Connectors
•
Analog Audio Ch. 1-4 In/Out DB25 connects to a supplied breakout cable,
providing 4 channels of balanced analog audio input and output connectors (8
XLRs).
•
RS-422 Control Port (Sony), 9-pin D, for machine control.
•
400mb IEEE 1394a FireWire connector for audio/video and control data
between the panel and an Apple Power Mac.
•
S-Video input and output connectors (two 4-pin mini-DINs).
•
Composite NTSC/PAL Video In/Out, 1 BNC for input, and 1 BNC for output.
•
Component YPbPr/RGB Video, 3 BNCs for input, and 3 BNCs for output.
•
Genlock/Reference Video (looping), two BNCs
•
AC power connector, 3 pin (with Ground)
Common
Connector
Descriptions (Io
LD
and Io
LA
)
RS422 Machine Control
A female DB9 connector provides connection for VTRs, camcorders,
disk media servers, and other devices using RS422 SMPTE (Sony)
protocol.
FireWire
IEEE 1394a FireWire connector for connecting to the 400 Mb/s
FireWire connector on an Apple Power Mac for passing video, audio,
and control data. Software installed from the Io Installer CD
provides the Power Mac with drivers that allow optimum use of Io
from within Final Cut Pro. This connector does not support
connection to any other FireWire devices.
RS-422