AJA IO LA, Инструкция по установке и эксплуатации, Страница: 55 / 76

1
47
Io LD and Io LA Installation and Operation Manual — Easy Setups for Typical Uses
To Create A New Easy Setup
If you have a group of presets that you’d like to use continually, then you can create a
new Easy Setup by modifying the settings of the Easy Setup currently selected (pick
one most like the one you want to create) and then saving it under a new name:
1. Change the currently selected Easy Setup by making changes at the Summary
tabbed window via the pulldown menus.
2. When everything is set as desired, click on the Create Easy Setup button at the
bottom of the Summary window.
3. A new dialog will pop up. Enter a descriptive name for the new Easy Setup (i.e.,
10-bit SDI from Video Server) in the
Name field.
4. Enter a sentence or two describing what is unique about the Easy Setup in the
Description field.
5. Click the Create button to store the new Easy Setup.
Audio/Video Settings, Creating a New Easy Setup
At any point in the above procedure you can go to the other tabbed windows and
make additional changes. For example, in the Sequence Presets, Capture Presets, and
Device Control Presets windows you can select a preset and click on an
Edit button to
change specific aspects of the preset. As an example, under Device Control Preset you
might wish to change the Time Source on your VTR from LTC to VITC, or change
the pre-roll and post-roll values. When you save a Setup, it defaults to saving in the
Final Cut Pro
Custom Setups folder.
Each of the tabbed preset screens are described on the following pages for your
convenience. For more information, please read the Final Cut Pro user
documentation.