AJA IO LA, Инструкция по установке и эксплуатации, Страница: 15 / 76

1
7
Io LD and Io LA Installation and Operation Manual — System Requirements
Note: FireWire drive solutions are not generally supported in use with AJA Io
LD
and
Io
LA
. Since they connect to the host Power Mac via FireWire and use the FireWire bus
bandwidth extensively, it cannot also be used for storage—at the same time. The only
exception is a portable Powerbook implementation where a PCMCIA FireWire card
provides an additional two ports; see the discussion on the PowerBook configuration
provided in this manual. You can however attach and use FireWire drives on the
Power Mac whenever Final Cut Pro is not in use. Their presence on the bus will not
affect Io
LD
or Io
LA
performance as long as they aren’t being actively used.
Disk Storage Solutions—G5 and Xserve RAID
External ATA/IDE or SCSI
RAID Scalable. Performance almost
as good as Xserve, although it
can be more complex to set up
and maintain. Many vendors
offer solutions (too many to list
here; check with your Apple
dealer for SCSI Storage
solutions for details). Although
the connection to the external
RAID chassis is SCSI, the
drives themselves may be
SCSI or ATA. A pure SCSI
array will offer higher
performance at a higher cost. Moderately
Expensive
Storage Method Features/Limitations Cost
Firewire
Connection
Firewire
Connection
Apple Xserve RAID
Apple G5
Dual-port 2Gb Apple Fibre Channel PCI card
(installed in the G5)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
AJA Io
LD
or Io
LA
SDI In Present
Audio Video
Status
FireWire Ref NTSC Power PAL
Mode
Out In
I o