AJA FS1, Инструкция по установке и эксплуатации

Страница: 44 / 140

34
Pressing either a parameter Select or parameter Adjust button while on the Status or
Screen Saver displays changes the display to the last remembered Parameter
Adjust menu. If you’re already viewing a Parameter Menu, pressing
a
Select or Adjust button causes a change to the next item.
The parameter Select buttons to the right of the display select a parameter to view
or modify.
Pressing one of the parameter Adjust buttons changes the current parameter’s
value to a new one from the FS1’s list of choices—repeating the list if you continue
to press
Adjust —or adjusting a numerical value up or down. The exact choices
displayed will vary depending on the parameter. Most adjustment choices made
with the
Adjust buttons take effect immediately and will be subsequently stored
into the FS1s non-volatile memory if they remain unchanged for 3 seconds.
If a Select or Adjust button is held down continuously, the changes will begin to
happen automatically with acceleration, if applicable.
Pressing either a Select or Adjust button while on the Status or Screen Saver displays
changes the display to the last remembered Control Menu.
Holding down both the Adjust (up) and Adjust (down) buttons at the same time will
set that parameter back to its factory default value.
The remaining topical headings in this chapter list all of the Parameter Menus by
number and name. The number shows the order in the menu navigation system:
pressing the up or down
Select button shifts you numerically up or down in the
order of their assigned parameter numbers. The name is what you’ll see in the
Parameter Menu display (for example, the first heading listed here is “1.1 Output
Format” which is exactly what you’ll see in the top line of the display when viewing
this parameter).
Select Adjust