AJA FS-HDR Скачать руководство пользователя страница 85

Страница: 85 / 129

FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1 85 www.aja.com

1.0 Custom Size/Pos

This parameter turns custom image settings On or Off. When Hide Inactive is on,

the Custom Size/Position controls are only displayed when Custom Size/Pos is

On. When Custom Size/Pos is Off, modified parameters are skipped in the menu

system, and the UFC hardware is programmed for unity.
This menu is also not displayed when Active Format Description (AFD) is in

control of the Conversion Mode.

NOTE: The Custom Size/Pos feature is not available in Single Channel Mode if both the

inputs and outputs are UltraHD/4K.

Off (default)

Sets this parameter and related custom size/pos parameters to off.

Enables this parameter and related custom size/position parameters.

1.1 Custom Size

This parameter changes the H and V size of the output picture by the specified

percentage (%) while maintaining the current aspect ratio.

100% (default)

10% to 200%

Maintains 100% picture size for the selected format.

Enables changing the picture size.

1.2 Custom Aspect

This parameter changes the H/V aspect ratio of the output picture while

maintaining the current V size (Aspect < 0) or H size (Aspect > 0).

0.000 (default)

-0.500 to +0.500

Maintains the normal 100% aspect ratio for the selected format.

Enables changing the aspect ratio.

1.3 Custom H Position

This parameter changes the H position of the output picture.

0% (default)

-100% to +100%

Maintains the normal horizontal position of the selected format.

Enables changing the horizontal position.

1.4 Custom V Position

This parameter changes the V position of the output picture.

0% (default)

-100% to +100%

Maintains the normal 100% vertical position of the selected format.

Enables changing the vertical position.

1.5 Custom Left Crop

This parameter changes the Left picture crop position.

100% (default)

+10.0% to +100.0%

Maintains the normal left side position of the selected format.

Enables changing the left side position.

Содержание FS-HDR


































































































































Результаты поиска

Содержание FS-HDR

Отзывы:

Похожие инструкции для FS-HDR

Бренды по названию

Популярные бренды

AJA FS-HDR, Инструкция по установке и эксплуатации

Результаты поиска

Содержание FS-HDR

Отзывы:

Похожие инструкции для FS-HDR

Бренды по названию

Популярные бренды