FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1 50 www.aja.com
Channel Select Button Video Button Menu Name
Setting
VID4
INPUT
1 Input
SDI5
VID4
INPUT
2.1 Dynamic Range&Gamut SDR BT.709 100 Nits
VID4
INPUT
2.2 SDR Highlights
If necessary, select best image from:
Standard, Soft 1-3, Bright
VID4
FORMAT
1 Output Format
720p5994
VID4
FORMAT
2.1 Dynamic Range&Gamut Hybrid Log Gamma BT.2100
VID4
FORMAT
3.0 Link Cfg SDI4
Sngl Link LvlA
VID4
FORMAT
4.0 Link Cfg SDI8
Sngl Link LvlA
Setup
• Ensure the FS-HDR is receiving a valid reference signal. Connect a 1080i59.94
HD tri-level sync signal to one of the Ref Loop BNC connectors, and terminate
the other Ref Loop BNC connector.
• Connect sources A and B to the FS-HDR SDI 1 and SDI 3 Input BNCs.
• Install an optional SFP module into the FS-HDR SDI 5 Input cage and connect
the source cable.
• Connect the FS-HDR SDI outputs to the downstream devices.
• Ensure the FS-HDR Vid (n) FORMAT
2.2 Dynamic Range Clamp
parameter is set
to
No Clamp
(default).
• View the FS-HDR SDI output signals on a compatible HDR or SDR display.
Procedure
System Configuration
1. If the FS-HDR is not already in Four Channel Mode, press the
CONFIG
System
button:
• Select
2 FS-HDR Mode
, select
HD/SD
and press the ADJUST knob. Wait for the
FS-HDR to reboot (not longer than 90 seconds).
2. Press the
VIDEO
System button
• Select
1 Output Frame Rate
, and adjust to
59/29/23
.
• Select
2 Genlock Source
, and adjust to
Reference
.
Video Processor 1 Setup
3. Press the
VID1
Channel Select button.
4. Press the
INPUT
Video button.
• Select
1 Input
, and adjust to
SDI1
.
• Select
2.1 Dynamic Range&Gamut
, and select
PQ BT.2020 1000 Nits
.
5. Press the
FORMAT
Video button.
• Select
1 Output Format
, and adjust to
1080p5994
.
• Select
2.1 Dynamic Range&Gamut
, and select
Hybrid Log Gamma BT.2100s
6. If you have optional SFP output modules installed, you can select
FORMAT
3.0 Link Cfg SDI5
and adjust to
Sngl Lnk LvlA
for an additional copy of that
converted signal.
Video Processor 2 Setup
7. Press the
VID2
Channel Select button.
