Airzone AZVAF10KPROBE, Руководство по установке

Страница: 33 / 63

33
IMPORTANT: Before, selecting the zone module which will be associated with the thermostat, check that this module is the
desired one. If this module is not the correct one, use the control bar to select another module and check again.
IMPORTANT: The thermostat will display first the wireless zone modules which are closer to it. Remember to configure this
thermostat near the wireless zone module to associate for greater comfort.
Units
(only if it has not been previously configured by any thermostat)
Zone ID
Select the zone associated to the thermostat. All the zones have a corresponding control output (output for motorized
elements or relay radiant heat control module). For example, the zone 1 will control the control relay output O1 of the relay
radiant heat control module.
Linked zones
(only if there are previously configured secondary)
If necessary, the system allows you to associate more than one control output to a zone. It is possible to control multiple outputs
from the same thermostat.
Important: Yo .
Thermostat settings
Select the operation of the thermostat:
- Main: Controls all the parameters of the installation.
- Zone: Controls all the parameters of the zone.
Control stages
(only for installations with relay radiant heat control module)
Select stages to be controlled in heating and cooling: Air, Radiant or Air+Radiant.
Main ID (only if the thermostat has been previously configured as zone)
Select the main thermostat address with which the thermostat is associated. Thus, this main thermostat will impose the
operation mode to the thermostat.
Other settings
Press to conclude the initial setup procedure, or access the advanced settings to change any other settings. Activate the basic
function if required (see
Advanced Settings, Zone settings).
Blueface