Airwell Airflow 2020, Инструкция по установке и эксплуатации

Страница: 45 / 80

45
Par Description Extended description UM default Pass.*
1 OnModeMan Operating mode manual selection enabling 1 0
2 TempH2OHeat Water temperature in heating °C 30 1
3 TempH2OCool Water temperature in cooling °C 20 1
4 OnSetMan Manual ambient setpoint enabling 1 0
6 DeadZone Dead zone between winter and summer set °C 2 1
7 Text0 Setpoint compensation: external 0 temperature °C 15 1
8 Text1 Setpoint compensation: external 1 temperature °C 18 1
9 Text2 Setpoint compensation: external 2 temperature °C 21 1
10 Text3 Setpoint compensation: external 3 temperature °C 24 1
11 Text4 Setpoint compensation: external 4 temperature °C 30 1
12 Set0 Setpoint compensation: value 0 °C 19 1
13 Set1 Setpoint compensation: value 1 °C 21 1
14 Set2 Setpoint compensation: value 2 °C 23 1
15 Set3 Setpoint compensation: value 3 °C 25 1
16 Set4 Setpoint compensation: value 4 °C 27 1
17 ExtRecManager Enables the recovery compressor management at supervisor charge 0 1
18 BandPR Proportional band °C 2 1
19 DeltaHeatAmb Dead zone (VheatAmb) °C 3 1
20 BandHeatRec Proportional band (VheatExt) °C 10 1
21 DeltaHeatRec Dead zone (VheatExt) °C 3 1
22 RecInteg Water coil operating enabling only in integration 1 1
24 LimTextHeat External temp. limit for the compressor operating in heating °C
-
15 1
25 TextCompOn External temperature limit below which the compressor is always on °C 10 1
26 SetOutHeat Outlet SetPoint in heating °C
-
3 1
27 DeltaSetOutHeat Setpoint variation range in Heat outlet °C 20 1
28 BandOutHeat Water coil modulation band in heating °C 2 1
30 SetURHeat UR SetPoint in heating % 55 0
31 BandURHeat UR humidity control band in winter ambient % 10 1
32 SetUROut Outlet limit humidity in heating % 90 1
33 BandUROut Outlet limit humidity control band % 10 1
34 MaxOut Humidifier control signal max. value % 100 1
35 LimTextCool Compressor external temperature limit in cooling °C 40 1
36 BandCoolRec Proportional band (VCoolExt) °C 5 1
37 DeltaCoolRec Dead zone (VCoolExt) °C 3 1
38 DeltaCoolAmb Dead zone (VCoolAmb) °C 5 1
40 SetOutCool Outlet SetPoint in cooling °C
-
2 1
41 DeltaSetOutCool Setpoint variation range in Cool outlet °C 5 1
42 BandOutCool Water coil modulation band in cooling °C 2 1
44 LimOutDC Outlet temperature limit during the dehumidification °C 23 1
45 BandLimOutDC Outlet temperature limit control band during the dehumidification °C 2 1
46 TimeStart Fan starting time sec 60 1
47 TimeStop Fan stopping time sec 60 1
48 TextStopFanHeat Ventilation stop external temp. in Heat °C
-
15 1
49 TambStopFanHeat Ventilation stop ambient temp. in Heat °C 10 1
50 TextStopFanCool Ventilation stop external temp. in Cool °C 38 1
51 TambStopFanCool Ventilation stop ambient temp. in Cool °C 30 1
54 TimeCycle Time between ventilation stop and start sec 1800 1
88 TimeThrow Permanence max. time of the outlet temperature more than the allowed limits sec 600 1
89 MaxFiltri Filter max. control signal value % 100 1
8 - CONTROL
8.11 UNIT PARAMETERS FOR THE INSTALLER USE
ATTENTION
The access to parameters or modifications are allowed only to the installer who assumes all responsibility, in case of doubts please
contact Airwell.
For any changes not permitted or not approved by Airwell, the same declines any responsibility for malfunctions and/or damages to
the unit/system.