Airwell Airflow 2020, Инструкция по установке и эксплуатации

Страница: 11 / 80

11
•
Fix some M8 threaded bars (not supplied) to the
ceiling.
•
Pass the M8 threaded bars in the brackets on the
unit.
•
Insert and screw on the tapped bar the spring
antivibration device.
•
The antibration device must be positioned with the
interior threaded downward
•
Insert the flat and notched washer and screw the
nut to lock.
•
Avoid to over tighten the nuts, the springs, because
if too much crushed they don’t absorb vibrations
.
•
Insert the M8 threaded bar on the support base.
•
Match the upper hole of the antivibration device
with the hole of the support bracket.
•
The antibration device must be positioned with the
interior threaded upward.
•
Insert the flat and notched washer in the bolt.
•
Screw the bolt in the top of the antivibration device
letting it pass through the hole on the bracket.
•
Do not over tighten the nuts, the springs, because if
too much crushed they don’t absorb vibrations
3 - POSITIONING
3.2 CEILING POSITIONING 3.3 FLOOR POSITIONING
A threaded bar
B bracket
C antivibration foot
D flat washer
E notched washer
F nut
A bolt
B notched washer
C flat washer
D bracket
E antivibration foot
F threaded bar