3
CLEVER CONTROL CHARACTERISTICS
CLEVER, the new advanced total control, leads the new generation in air curtains management:
Maximum c maximum energy saving.
Clever automatically adapts the functioning of the air curtain to the entrance climatic conditions in order to keep
the comfort and energy saving.
Simple Installation Plug & Play. Factory adjusted to just switch on and run.
Main Advantages:
INTELLIGENT REGULATION
Depending on door state, on how often the door is open/closed, the internal/outside temperature or discharge
temperature, Clever optimizes the ventilation and heating to create an efficient barrier for an optimal and
effective climate separation. With manual or automatic functioning, it works with many different programs
depending on heating type (water, electrical, heat pump or unheated) and installed temperature sensors.
Clever Control has lots of extra functions to fulfil all client needs.
USER FRIENDLY
Multilanguage and easy icons for fully understanding. Main state screen indicates of the most important
settings including: Ventilation speed, heating, temperatures, door state, working mode and program, filter state,
day/hour, timer, etc.
Different menu configurations depending on who is managing the equipment:
•
“User” simplified mode
•
“Basic”, with main parameters
•
“Advanced” for professionals.
ENERGY SAVING
Clever Control has 3 grades of comfort and energy efficiency which can be adjusted in all manual and
automatic programs. “Eco” mode uses the less energy possible without compromising too much the comfort,
while “Comfort” spends more ventilation/heating to maintain or achieve quicker the set temperature. As
indicates, “Medium” it's in between both modes.
ADAPTIVE DOOR DELAY
When the door closes, the air curtain remains working at door open conditions for certain time to be ready if it's
open again. The power of the unit during this delay time is divided in two strength stages, where the first is
stronger than the second one in order to save energy. There are two types: “Fixed” where you can select the
duration of the delay, or “Flexible” which adapts automatically the time depending on how often the door is
opened.
FILTER ALARM
Indicates when filter needs replacing/cleaning. Clever offers 2 options: By “Timer” of functioning hours or by
“Pressure Sensor” switch. Filter sign will change color depending on the state from green to orange and finally
red combined with a flashing message on the screen.
MULTI-EQUIPMENT
Clever PCB can manage different types of units: Air curtains, fan heater, AHU, etc. Once programmed, it can
work alone without any TFT control. Clever controller display shows the functioning and is used to program
each device. One TFT can manage up to 255 different units, each one with its own program. The system
detects and shows automatically how many units are connected. End user can customize the name of each
equipment.
