MILITARY CYPRES USER'S GUIDE
Airtec GmbH
Page 13
3.1
Processing unit
The processing unit must be positioned
centrally
on the partition wall separating the
main and reserve containers, so that the reserve canopy material covers and surrounds
the unit on all sides. This offers the best protection against temperature variations
and impact damage.
For installation, the processing unit is placed into a specially bolstered and labeled
nylon pocket which is supplied with every CYPRES.
Excess cable is stowed in the flat part of the pocket underneath the velcro-adjustable
flap. If you have to stow both the thinner EOS cable and thicker cable to the control
unit, be sure to place the thicker cable so that it lays on top of the thinner one. Cables
should be placed in a circle in order to avoid twists. Always avoid pulling, bending,
twisting, or kinking the cables.
When placing the processing unit into its nylon pouch, make sure that the cables lie
flat on the bottom.
wall separating
main and reserve
container
processing unit
(middle position)
right
wrong
