AirStage ASUB18RLAV, Руководство по установке

Страница: 15 / 17

En-14
Top holes (2 sides)
Top hooks (2 sides)
Top hole (center)
Top hooks (2 sides)
Indoor unit
Top hook (center)
(4) Close the intake grille.
Intake grille
Panel
Check that:
• The top and bottom hooks are hooked fi rmly and the indoor unit does not move to
the front and rear or left and right.
• The indoor unit is accurately positioned horizontally and vertically.
• When connected from the left rear, the drain hose is at the bottom left of the wall
pipe.
(View from indoor)
Connection cable
(Power supply cable)
Wall pipe
Connection pipe
Connection cable
(Transmission and Re-
mote controller cable)
Drain hose
Saddle *
Pipe
Outside wall cap *
Wall
(Outdoors)
Sealer putty *
* Field supply
GOOD
Drain hose
Saddle
Lifted up
Wave
End in water
PROHIBITED
]1
8.2. Installing front cover
Fix the indoor unit
(1) Please remove the spacer.
Indoor Unit
Remove
Spacer
(2) Hook the fi ttings of the indoor unit to the 2 bottom hooks while lowering the unit and
pushing it against the wall.
Bottom hook
Indoor unit
Top hooks
Front panel installation.
(1) First, fi t the lower part of the front panel, and insert top and bottom hooks. (Top center
and both sides)
(2) Attach the 6 screws.
(3) Attach the intake grille.
Intake grill installation.
(1) The fi xing axle of the intake grille is installed on the front panel.
(2) Lay down the intake grille.
9373370154-01_IM.indb 14 9373370154-01_IM.indb 14 3/14/2012 3:03:57 PM 3/14/2012 3:03:57 PM