Airspan ProST 4.9, Руководство по установке оборудования

Страница: 31 / 56

Cabling The ProST
27
CONNECTING PROST TO SDA-1
The ProST connects to the SDA-1 using a CAT 5 cable with 8-pin RJ-45 connectors on either
end. The ProST provides a 15-pin D-type port for interfacing with the SDA-1. However, for
allowing the use of RJ-45 connectors, your ProST kit includes a DB15-to-RJ45 adapter that can
easily be attached to the ProST's 15-pin D-type port.
The cable setup for ProST-to-SDA-1 connectivity is as follows:
Cable: Straight-through CAT 5 Ethernet cable
Connectors: 8-pin RJ-45
Connector pinouts:
Wire color Wire
pair
Pin Function
Blue/White 5 +48 VDC
Blue
1
4 48 RTN
Orange/White 1 Rx+
Orange
2
2 Rx-
Green/White 3 Tx+
Green
3
6 Tx-
Notes:
• Only pins 1 to 6 are used.
• Pins 7 and 8 should not be wired to the ProST end.
• The wire color-coding described in the table is AS.MAX's standard for wire color-coding.
However, if you implement your company's wire color-coding scheme, ensure that the
wires are paired and twisted according to pin functions listed in the table above (e.g. Rx+
with Rx-).
To connect the ProST to the SDA-1:
1. Attach the DB15 side of the DB15-to-RJ45 adapter to the ProST's 15-pin D-type port
(female).
2. Plug the RJ-45 connector of the Category 5 Ethernet cable (not supplied) into the RJ-45
port of the DB15-to-RJ45 adapter.
3. Plug the RJ-45 connector, at the loose end of the Category 5 Ethernet cable, into the
SDA-1's RJ-45 port labeled RADIO .