Airspan ProST 4.9, Руководство по установке оборудования

Страница: 25 / 56

Mounting
21
To pole mount the ProST:
1. Attach the mounting bracket to the ProST:
a. Align the mounting bracket with the ProST's mounting holes so that the mounting
bracket's side with the built-in nut is aligned with the ProST's mounting holes furthest from the
ProST's front panel, as shown in the figure below.
b.
Slide an M10-flat washer and M10-spring lock washer onto an M10-hex head screw
(ensure spring lock washer is closest to the bolt's head). From the external side, insert the M10-
hex head screw through the mounting bracket and ProST's mounting holes. Fasten the M10-hex
head screw (one is provided with a built-in nut while the other requires you to insert an M10-
hex nut into the ProST's mounting hole).
2. Attach the clamping bracket to the mounting bracket:
a. Slide an M6-spring lock washer onto an M6-hex head screw. Align the mounting
bracket's and clamping bracket's pivot holes, such that the clamping bracket is aligned to the
inside of the mounting bracket. From the external side of the mounting bracket, insert the M6-
hex head screw into the pivot holes and then fasten, but not tightly. (The clamping bracket
provides a built-in nut.)
b.
Choose an elevation hole on the mounting bracket and then align it with the
corresponding hole on the clamping bracket. Slide an M6-spring lock washer onto an M6-hex
head screw, and then from the external side of the mounting bracket, insert the M6-hex head
screw through the elevation hole on the mounting bracket and into the clamping bracket's
corresponding hole. Fasten but not tightly the M6-hex head screw (the clamping bracket
provides built-in nut). The elevation hole can later be changed according to desired antenna
orientation in the elevation plane.