Airspan ProST 4.9, Руководство по установке оборудования

Страница: 22 / 56

605-0000-707 ProST 49 Installation User Guide-Rev C
18
1. Position the unassembled mounting bracket on the mounting surface (e.g. wall), and
then use a pencil to mark the position of the four mounting holes. Ensure that the
distance between the hole centers are 120 mm (height) and 60 mm (width), as
displayed in the figure below showing the ProST's fixing dimensions.
2. Drill holes for each hole that you marked in the step above.
3. Insert wall anchors (not supplied) into each of the drilled holes.
4. Align the mounting bracket's four holes with the wall anchors, and then insert a screw
(not supplied) through the mounting bracket holes into each wall anchor, and then tighten.
Note: Airspan does not provide screws for attaching the mounting bracket to the wall.
The screw size depends on the structure of the building to which the bracket is to be
attached. When selecting screw sizes, consideration must be given to the weight of the
ProST and load that may be induced in windy conditions.