AirHarmony-1000 Installation Guide
UGD-D01006
Airspan Commercial and Internal Use
52
A Job Sheet
This job sheet enables the users to keep track of their installation. It covers all the prerequisites
required for accomplishing the AirHarmony-1000 installation.
Site Requirements
o
Pole or wall for installation identified
o
Position on pole or wall identified
o
Pole access restrictions (highway regulations, other services on pole,
power pole)
o
Method of reaching pole positions (ladders, Elevated work platform)
o
AC main fuse block available for AC/DC converter (where needed)
o
Configuration programming details known
o
Point of connection for Ethernet (if applicable)
o
All equipment items available at the installation site
o
Main AirHarmony-1000 unit
o
Mounting bracket and pole clamps
o
AC/DC converter
o
GPS Antenna
o
Self-amalgamating tape
o
Black PVC tape
o
Weather-proofing of the connections with a layer of self-
amalgamating tape followed by an over layer of PVC tape.
o
SFP cable assembly
Tool Requirements
(For further information, see
.)
o
Large flat screw driver for pole clamps
o
Small flat blade screw driver (insulated shaft recommended)
o
Medium Philips head screw driver
o
13mm wrench or small pipe wrench
o
10mm wrench for unit mounting flange nuts
o
Knife
o
pliers
o
Small side cutters
o
Tweezers (or fine blade long nose pliers)
o
Wire strippers
o
Tilt-meter
Required Ancillary Equipment
o
Laptop PC for initial configuration
o
cable for temporary connection of the lap top
