AirHarmony-1000 Installation Guide
UGD-D01006
Airspan Commercial and Internal Use
42
5. Secure
the
prepared
ends
of
the
power
cable
into
the
head
part
of
the
connector
(male
part with
visible pins).
Figure 41: Secure cable to connector
6. Insert and secure the
brown
wire into position
1
and the
blue
wire into position
2
and
green
wire into position
(earth ground).
Figure 42: Power cable wires assembled
Note:
Individual connection numbers are marked on each part of the connector.
Note:
Set screw
maximum recommended tightening torque of 0,3 Nm.
Figure 43: Numbered connector contacts
7. Assemble the parts of the connector and tighten the gland to provide a waterproof seal.
