AirLive PoE-FSH2442 User’s Manual
18
6.9.3 Trunk
Setting
The Trunking function enables the cascading of two or more ports for a combined larger bandwidth. Up to six
Trunk groups may be created, each supporting up to 8 ports. Add a Trunking Name and select the ports to
be trunked together, and click Apply to activate the selected Trunking groups.
Figure 23. Trunk Configuration
Be sure that the selected trunk setting port must connect to the device with a same VLAN group.
6.9.4 Mirror
Setting
Port Mirroring is a method of monitoring network traffic that forwards a copy of each incoming and/or
outgoing packet from one port of the Switch to another port where the packet can be studied. This enables
network managers to better monitor network performances.
Figure 24. Mirror Setting
Selection of the Sniffer mode is as follow:
TX (transmit) mode:
this mode will duplicate the data transmit from the source port and forward to the
Sniffer port.
RX (receive) mode:
this mode will duplicate the data that send to the source and forward to the Sniffer port.
Both (transmit and receive) mode:
this mode will duplicate both the data transmit from and data that send
to the source port, then it will forward to the Sniffer port.
6.9.5
IEEE 802.1p Default Priority
This feature displays the status Quality of Service priority levels of each port, and for packets that are
untagged, the switch will assign the priority in the tag depending on your configuration.
