86
MCS :
This parameter represents transmission rate. By default (Auto) the fastest possible transmission rate will be
selected. You have the option of selecting the speed if necessary. (Refer to
Appendix C. MCS Data Rate
)
MPDU Enable :
Check
Enable
button to activate this function, and
Disable
to deactivate.
A-MPDU
: A-MPDU (Aggregated Mac Protocol Data Unit) allows the transmissions of multiple Ethernet frames to a
single location as burst of up to 64kbytes This is performed on the hardware itself. Select “Manual” to set “MPDU
Density”
MPDU Density :
Minimum separation of MPDUs in an A-MPDU.
0
1 2 3 4 5 6 7
No Restriction ¼ µs ½ µs 1 µs 2 µs 4 µs 8 µs 16 µs
A-MSDU :
Aggregated Mac Service Data Unit, A-MSDU. Select
Enable
to allows aggregation for multiple MSDUs in
one MPDU. Default is disabled.
Click
Save
button to save your changes. Click
Reboot
button to activate your changes.
