214
9
User Name :
Enter User Name for PPPoE connection
9
Password :
Enter Password for PPPoE connection
9
Reconnect Mode :
•
Always on
– A connection to Internet is always maintained.
•
On Demand
– A connection to Internet is made as needed.
When Time Server is enabled at the “On Demand” mode, the “Reconnect Mode” will turn out “Always on”.
•
Manual
– Click the “
Connect
” button on “
WAN Information
” in the Overview page to connect to the
Internet.
9
Idle Time :
Time to last before disconnecting PPPoE session when it is idle. Enter preferred Idle Time in
minutes. Default is “
0
”, indicates disabled. When Idle time is disabled, the “
Reconnect
Mode
” will turn out
“
Always
on
”
9
MTU :
By default, it’s
1492
bytes. MTU stands for Maximum Transmission Unit. Consult with WISP for a
correct MTU setting.
Î
PPTP :
The Point-to-Point Tunneling Protocol (PPTP) mode enables the
implementation of secure multi-protocol Virtual
Private Networks (VPNs)
through public networks.
9
IP Address :
The IP address of the WAN port
9
IP Netmask :
The Subnet mask of the WAN port
9
PPTP Server IP Address :
The IP address of the PPTP server
9
User Name :
Enter User Name for PPTP connection
9
Password :
Enter Password for PPTP connection
9
Reconnect Mode :
•
Always on
– A connection to Internet is always maintained.
•
On Demand
– A connection to Internet is made as needed.
