175
Chapter 7. Client Universal Repeater
Configuration
When Client Universal Repeater mode is activated, the system can be configured as an
Access
Point
and
Client
Station
simultaneously. This section provides information in configuring the Client Universal Repeater mode with
graphical illustrations. APO1200/APO1215 provides functions as stated below where they can be configured via a user-
friendly web based interface.
Option System
Wireless
Utilities
Status
Operating Mode
General Setup
Profiles Settings
System Overview
LAN
Advanced Setup
Firmware Upgrade
Clients
Management
Repeater AP Setup
Network Utility
Remote AP
Time Server
Wireless Profile
Reboot
Extra Info
Functions
SNMP
Site Survey
Event Log
Table 7-1: Client Universal Repeater Mode Functions
7.1 External Network Connection
7.1.1 Network Requirement
It can be used as an Client Bridge or Universal Repeater to receive and repeat wireless signal over last mile applications,
helping WISPs deliver wireless broadband Internet service to new residential and business customers. In this mode,
APO1200/APO1215 is enabled with DHCP Server functions. The wired clients of APO1200/APO1215 are in
the
same
subnet from Main Base Station and it
accepts
wireless connections from wireless client devices.
Figure 7-1
Client Universal Repeater mode network Configuration
When the APO1200/APO1215 configured as an Access Point and Client Station simultaneously, the Wireless
General and Advanced Setup also used simultaneously. But the Security Type can be different. In the other
word, the channel or other settings will be the same between APO1200/APO1215 to Main Base Station and
wireless client to APO1200/APO1215, but security type can be different.
APO1200
