170
6.7.3 Remote AP
SSID, MAC address, antenna 0/1 received signal strength and channel bandwidth for associated AP are available.
ESSID :
Shows the current ESSID, which must be the same on the wireless client and AP in order for communication
to be established.
MAC Address :
Display MAC address of associated AP.
Signal Strength ANT0/ANT1 :
Shows the wireless signal strength of the connection between system and an access
point.
BandWidth :
Shows the current channel bandwidth used for communication. It should be “20” or “40”
If displays “No Connection AP!”, you need check Wireless configuration. Things to verify are Channel and
Security type. Also, adjust antenna angle and Tx Power.
