218
8.2 Wireless LAN Network Creation
The network manager can configure related wireless settings,
General Settings, Advanced Settings, Virtual AP(VAP)
Setting, Security Settings,
and
MAC Filter Settings
.
8.2.1 Wireless General Setup
The administrator can change the data transmission, channel and output power settings for the system. Please click on
Wireless -> General Setup
and follow the below setting.
MAC Address :
The MAC address of the Wireless interface is displayed here.
Band Mode :
Select an appropriate wireless band; bands available are
801.11a
or
802.11a/n
mixed
mode
.
AP Isolation :
Select
Enable
, all clients will be isolated from each VAP, that means different VAP's clients can not
reach to each other.
Transmit Rate Control :
Select the desired rate from the drop-down list; the options are auto or ranging from
6
to
54Mbps
only for
802.11a
mode.
Country :
Select the desired country code from the drop-down list; the options are
US
,
ETSI
,
JP
and
NONE
.
Channel/Frequency :
The channel range will be changed by selecting different country code. Below depicts the
channel range for different
Country
.
Country Channel
US
36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161
ETSI
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
JP
36, 40, 44, 48
NONE
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161
Tx Power :
You can adjust the output power of the system to get the appropriate coverage for your wireless network.
Specify digit numbers between
1
to
100
(the unit is %) for your environment. If you are not sure which setting to
choose, then keep the default setting,
100
%.
When
Band Mode
select in
802.11a only mode
, the
HT(High Throughput)
settings should be hidden immediately.
