[email protected] | www.airgain.com | + 1-855-AIRGAIN
14
9. Ensure power has been terminated to vehicle power system as reviewed in step 7 of
this installation guide before terminating 4 Pin power cable to ethernet injector
a. Route the cables securely through the vehicle with enough slack so that they
will not be accidently tugged when placing and removing items in the vehicle
trunk
10. Connect the Ethernet cable from the Ethernet Injector to either the vehicle router
WAN port or directly to user equipment requiring Internet connectivity (e.g., laptop)
11. If your model of AirgainConnect includes Wi-Fi and GNSS then attach those coax
cables to the appropriate vehicle router ports.
12. The multi-color LED on the ethernet injector indicates operational status. After at
least 1 minute, the LED should turn solid green
(Figure 10)
State
Indicator Color
Description
Power off
& sleeping
Off
The LED is off when the power is off, or the device is sleeping
Booting up Blue
Solid blue while booting up
No SIM card Red
Solid red after bootup when there is no valid SIM card
No signal
Red/Green/Blue
Blinking red after bootup when there is no cellular coverage signal,
followed by blinking green, followed by reboot solid blue
No USB
connection
Red
Blinking red after bootup when there is no connection to the
antenna-modem
Connecting Green blink
Blinking green while connecting to the cellular network
Connected
Green
Solid green when connected to the cellular network
Figure 10
