[email protected] | www.airgain.com | + 1-855-AIRGAIN
9
Wi-Fi and GNSS cables to the vehicle router Wi-Fi and GPS ports
Notes:
• The Installer may encounter various obstacles with individual vehicle designs that
may require different placement, routing of cables or drilling of holes to complete the
mounting procedure.
• Mount the housing on the roof of the vehicle
• The housing must be mounted horizontally, parallel to the ground (not mounted on a
vertical surface).
• The housing must be mounted to a flat, clean dry surface. Avoid mounting the
housing near panel seams or rivets so the foam pad can seal properly.
• The housing should be installed with a minimum distance of 18 inches from existing
antennas, light bars or obstacles protruding from the roof or trunk lid of the vehicle.
• The antenna must be mounted at least 18 inches away from any other
communication antenna to maintain specified performance and limit interference to
other in-vehicle communication systems.
• When routing cables, do not pull on the connectors. Pulling directly on connectors
may cause damage and loss of the signal at the radio receiver, GPS, or modem.
• When mounting, make sure that the surface temperature where the housing is to be
mounted is between 85°F to 100°F (30°C to 38°C). Cooler surface temperatures may
cause improper adhesion to the surface.
