If access to the corner gussets is impossible, it
should position the casing against each other so that
the seal is compressed evenly on the entire
periphery.
The boxes are then joined together by three
brackets to screw into the profiled aluminium (self-
taping screws not included).
For units with the "Angle frame" option, once the
assembly of boxes is finished, place the brackets in
position and screw in the aluminium frame (self-
taping screws not included) - Ditto for the 'trim cover
(2).
OUTDOOR UNITS
For units located outdoor a roof usually
delivered in kit must be settled.
(self-taping screws and bolts and washers).
Single slope roofs are horizontal
Gabled roofs come with a ridge as well as a
sub carrier assembly for carrying a slight slope.
The roofing elements must be inserted one
into the other, starting from one end of the
plant.
Ensure an overflow of 200 mm.
Fixing is by self-tapping screws over the entire
periphery of the roof and Teflon sealing rings
provided. Distance between 2 screws: 200 mm
Max.
When provided, place the caps screw heads
Check the strength to good resistance to
prevailing winds.
Remove the plastic skin protection.
If the heating abinet has an outside air intake,
it shall be located away from prevailing winds
(if possible).
(1)
(2)
Seal with silicone the interlockings
throughout their length
7
